TEL:+86 755 23695285       Email:Sales1@jesilicone.com

Silicone Foam Tube
9/20

2019

Silicone Foam Tube

Foamed silicone tube is foamed by the high temperature principle of silicone rubber. The foamed silica gel strip belongs to extruded silica gel, which mainly plays a sealing role. Foamed silicone tube is mainly used in supporting electrical appliances, electronics, furniture equipment, toys, hardware, medical equipment, sporting goods, audio, lighting, machinery, automobiles, bottle and can seal, building curtain wall sealing and other industries. Advantage of foamed silicone tube: 1), environmental protection, insulation, high temperature resistance, compression resistance, strong resilience; 2), the surface tolerance is small, and the foaming density is uniform; 3), acid and alkali resistant, anti-aging, non-toxic, tasteless, odorless; 4) Good surface layer is not sticky and has good air permeability;

Solve the problem of white spots on silicone tubes
9/19

2019

Solve the problem of white spots on silicone tubes

Recently, I learned from some technicians in the silicone products factory in the same industry that the surface of the silicone tube that has just been made is prone to white spots of different sizes. The surface of the silicone tube extruded from the normal factory is smooth and translucent, may It is considered to be the problem of raw material silica gel by some buyer, or some people think that it is caused by the weather being too hot for a long time. With these problems, I specifically ask the professional technical operators for the reason, and today I will give you the answer. JE's senior technician explained that the reason why the silicone tube has white spots is not because of the rubber compound. When the raw material is kneaded and then passed out through the extrusion drying tunnel, it needs to be subjected to secondary vulcanization baking, but the time of secondary vulcanization Must be controlled, the time used for different silicone products and customers' requirements are different. If the silicone tube is only white, it can be re-vulcanized. The product without vulcanization is unripe and easy. Crisp, the product will also shorten the life of the silicone tube. Secondly, the temperature of vulcanization also needs to be well grasped. Therefore, our customers need to clearly confirm the requirements of the products when purchasing silicone tubes. Manufacturers must not blindly produce ,and Manufacturers cannot produce unqualified products in order to save time and cost. JE specializing in the production of silicone tube, silicone sealing ring, silicone sealing strip , with 15 years of production technology experience, welcome customers in need to inquire Visit.

What are the characteristics of large diameter silicone tubes?
9/18

2019

What are the characteristics of large diameter silicone tubes?

Large-diameter silicone tubes are used in the transportation, automotive, and shipbuilding industries. In the automotive industry, silicone tubes are used primarily for systems such as engine water cooling and intercooling. In addition to being used in the automotive industry, large-diameter silicone tubes are also widely used in radio motors and communications equipment, and are also used in the aerospace industry. In general, large-diameter silicone tubes It is a kind of industrial silicone tube. Although the large diameter silicone tube is an industrially used silicone tube, its quality and performance requirements are also very strict. Large-diameter silicone tubes are also used in many important systems in the industry, and their role is very important, so the performance requirements for silicone tubes are particularly strict. The large-diameter silicone tube is a silicone tube with a large diameter that meets the connection needs of some large equipment and the needs of the catheter. The silicone tube has large elasticity, high elasticity, and is resistant to compression for a long time without deformation. At the same time, the silicone tube can also have a flame retardant effect. Many silicone tubes are now made of imported silica gel. All are non-toxic, odor-free, environmentally friendly and highly transparent. The large-diameter silicone tube has better heat resistance than the ordinary rubber tube. The large-diameter silicone tube can achieve the effect without any performance change in the high temperature environment below 150 degrees. The large-diameter silicone tube is in two Baidu. In high-temperature environments, it can still be used for 10,000 times without changing any performance. Therefore, more and more applications have used large-diameter silicone tubes instead of the original rubber tubes. This change has also increased production safety several times. There are strict requirements for large diameter silicone tubes used in the automotive industry. For the inner diameter of large-diameter silicone tubes, the inner diameter can be 5 mm according to the production requirements, and the largest outer diameter can be produced to 500 millimeters. The thinnest wall thickness of large-diameter silicone tubes can be two millimeters.

Difference between platinum silicone tube and ordinary silicone tube
9/17

2019

Difference between platinum silicone tube and ordinary silicone tube

Platinum silicone tube is an upgraded version of ordinary silicone tube, which has wider application value. Whether it's stretchability, chemical inertness, or temperature, it's better than regular silicone tubing. Let people take a step closer to advanced food and drug equipment. So, in the end, what is the difference between platinum silicone tubes and ordinary silicone tubes? Let's make a small comparison. First, ordinary silicone tube Ordinary silicone tube is made of ordinary silica gel. It is widely used in the pharmaceutical industry in the early days of silica gel application. However, with the use of the year after year, its effect has gradually declined. Even though silica gel has a strong physiological inertia, the pharmaceutical industry has a very high demand for equipment. In order to protect human life, a large number of ordinary silica gel materials are eliminated every year, which increases medical costs. Second, platinum silicone tube This new type of silica gel material is the savior of ordinary silica gel materials. It is made of imported materials and uses two-component addition vulcanizing agent. Many times the hospital will do some human implant surgery for the patient, and the patient will generally have a large rejection reaction. At this time, the new silica gel material will play a role in minimizing the inflammation of the surrounding tissue and causing side effects. Minimize to avoid complications in the patient. And the service life and transparency of platinum silicone tube are very prominent, although it is slightly more expensive than ordinary silicone tube, but the practical value is better, the use is more assured, and the purchase is more peace of mind. With the development of modern technology, China's control over the food and drug field is becoming more and more strict. The platinum silicone tube has passed SGS strict quality inspection, and has passed the double high quality standard of ROHS and PAHS, which has been recognized by all walks of life. Consumers purchase Platinum silicone tubes are also more assured, with basic product support. Consumers face all kinds of products on the market, we must buy high-standard silicone materials at one time, consumers can not choose inferior products because of the small cheap. In any case, the platinum silicone tube provides us with a brand new silicone material channel. It is believed that it will become the “overlord” in the food and drug industry and win more people's recognition.

Jiajie  silicone tubing
9/15

2019

Jiajie silicone tubing

Many people are still unclear about the types of silicone tubes. Now we will briefly introduce the classification of silicone tubes. In general, silicone tubing can be divided into food grade silicone tubes, sanitary grade silicone tubes, medical silicone tubes, and the like. 1. Food grade silicone tube: widely used in coffee pots, water heaters, bread makers, disinfection cabinets, water dispensers, kettles, iron, rice cookers, oil pans, pulpers, combustion equipment and other mechanical products, machinery, electrical and other industries. Because it has the characteristics of high temperature resistance, no decomposition of any smell, taste, corrosion resistance, etc., it can be used as a water dispenser. A protective case for coffee makers, beauty salons and lighting. 2. Sanitary silicone tube: In order to withstand repeated compression and release, its reliability is much stronger than standard silicone tube, and its stability is strong. It is generally suitable for the inhalation and export of various high-quality milk and fat foods, effectively keeping the products clean and thus achieving a greater degree of pollution-free. 3. Medical silicone tube: Inorganic polymer colloidal material obtained by polycondensation of silicic acid, the main component is SiO 2*nH2O, containing more than 98% of quantum, non-toxic and tasteless, chemically stable, under normal conditions, in addition to lye In addition to hydrofluoric acid, it does not react with any acid or base. The medicinal silicon tube provides a balanced solution flow rate, effectively inhibits bacterial growth, withstands continuous peristalsis, and effectively improves the efficiency of the drug.